IC-M802 HF Marine Transceiver

Standard 4×8 remote controller

The IC-M802 offers an industry-standard 4-inch tall (10.16 cm) remote controller. When set up with the IC-M502 VHF radio, Icom offers you a complete communications station.

Large LCD with dot matrix characters

You can easily read the alphanumeric name of any of the 1355 ITU channels at a glance with the large LCD display. Nighttime operation is no problem with 10 levels (plus OFF) adjustable backlit display and keypad.

Easy to use in all conditions

The IC-M802 offers two large dials – bank and channel – for easy channel selection. Up to 16 banks of 20 (max.) each for user channels, and 17 banks for ITU channels are available.

Built-in digital selective calling

For added safety at sea, the IC-M802 offers the latest in one-touch DSC emergency communications technology. (ITU Class E standard.) The emergency button is covered by a red, spring loaded hatch to avoid accidental DSC activation.

Digital signal processor advantage

The speech compressor, utilizing DSP, increases average talk power. Flexible filter settings provide for narrow band signals like e-mail, SITOR, FSK and other operation without an optional filter.

150W (PEP) of powerful output

150 Watts of power offers superior worldwide communications. A one piece, die cast aluminum chassis and a large cooling fan allow continuous transmission at full output power– very important for data communications, like e-mail.

One-touch e-mail access

An SSB first! The IC-M802 can be set to memorize your HF e-mail access frequency, mode and bandwidth settings. At sea e-mail has never been easier.
* Please consult with an HF e-mail provider for details.

Automatic antenna tuner, AT-140

An optional automatic antenna tuner, AT-140, easily connects to the IC-M802. When the tuner cannot tune the antenna, the IC-M802 bypasses the tuner and displays a warning indicator on the LCD.

Other features

  • Wide band receive coverage (0.5 – 29.9999MHz)
  • Remote control mic allows you to select channels directly
  • Accessory RS-232C port allows connection of modem, etc.
  • GPS input, NMEA 0183 version 3.01
  • A headphone jack in front of the controller
Product Features
General

Frequency coverage

Rx

Tx

(unit: MHz)
0.5– 29.9999 (continuous)

1.6– 2.9999, 4.0– 4.9999, 6.0– 6.9999

8.0– 8.9999, 12.0– 13.9999, 16.0– 17.9999

18.0– 19.9999, 22.0– 22.9999, 25.0– 27.5000

Type of emission

J3E (SSB), J2B (AFSK), F1B
(FSK), A1A (CW), H3E (AM*)

*Rx only

Number of channels 1355 (max.)
(160 programmable channels; 249 ITU SSB duplex; 72 ITU
SSB simplex; 662 ITU FSK duplex; 160 e-mail; 21 ITU
4MHz simplex; 31 ITU 8MHz simplex)
Antenna impedance 50Ω (SO-239)
Power supply requirement 13.6V DC ±15%

Max. current drain

(at 13.6V DC)

Tx (Max. power) 30A (typ.)

Rx (Max. audio) 3.0A

Operating temp. range
Guaranteed range

–30°C to +60°C; –22°F to +140°F

–20°C to +55°C; –4°F to +131°F

Frequency stability ±10 Hz (at –20°C to +55°C)

Dimensions

Main unit
Controller
Speaker

 
240×94×238.4mm; 9716×31116×938in
220×110×84.4mm; 82132×41132×3516in
110×110×84.4mm; 41132×41132×3516in

Weight
Main unit
Controller
Speaker

 
4.7kg; 10.36lb
570g; 1.26lb
370g; 0.81lb
Transmitter
Output power 150, 60, 20W PEP (Selectable)
Spurious emissions –62dB
Unwanted sideband 55dB
Carrier suppression 40dB
Microphone impedance 2.4kΩ
Receiver

Sensitivity (at 10dB S/N)

  J3E, A1A J2B, F1B H3E DSC (J2B)
0.5 – 1.5999 MHz 6.3µV 32µV 0.5µV
(at 1% error rate)
1.6 – 1.7999 MHz 0.89µV 0.89µV 6.3µV
1.8 – 3.9999 MHz 0.5µV 0.5µV 3.2µV
4.0 –29.9999 MHz  

Spurious response

rejection ratio

Tx/Rx (1.5-29.9999MHz) More than 70dB
DSC (Except 1st IF image) More than 50dB
DSC (1st IF image) More than 60dB
Audio output power 4.0W at 10% distortion with a 4Ω load
Audio output impedance: 4–8Ω
Clarity variable range ±150 Hz
GPS interface NMEA 0183 version 3.01
Product Accessories
  • AT-140 HF AUTOMATIC ANTENNA TUNER
    Matches the transceiver to a long wire antenna with little insertion loss. Cable connections are easy to install. AT-130 is also available.

    at140 automatic antenna tuner
  • OPC-566 POWER CABLE
    30' shielded control cable.
  • MN-100 ANTENNA MATCHER
    Match the transceiver to a dipole antenna. Covers all HF bands from 1.5 to 30MHz. Two 8m (26.2ft) antenna wires come attached.

    mn100 antenna matcher
  • MN-100L ANTENNA MATCHER
    Match the transceiver to a longwire antenna. Covers all HF bands from 1.5 to 30MHz. A 15m (49.2ft) antenna wire comes attached.

    mn100l antenna matcher
  • OPC-1147/N SHIELDED CONTROL CABLE
    10m (32.8ft) shielded control cable connects between AT-140 and transceiver. OPC-1147N is for use with AT-140 Version 36.

    opc1147n shielded control cable
  • HM-135 HAND MICROPHONE
    Water resistant, remote function mic. Same as supplied.
  • MB-75 FLUSH MOUNT KIT
    For mounting the controller or speaker to a panel.

    mb75 flush mount kit
  • SP-24 EXTERNAL SPEAKER 4×4-inch external speaker. Same as supplied. Input impedance: 4Ω. Max. input power: 7W.
  • AH-710 FOLDED DIPOLE ANTENNA
    Covers 1.9 to 30MHz band. Has an SO-239 connector and 30m (98.4ft) coaxial cable. Easy to assemble (non-kink construction).
  • RC-25 REMOTE CONTROLLER
    Remote controller head. Same as supplied. Only one control head can be used on the M802.
  • OPC-1106 SEPARATION CABLE
    5m (16.4ft) separation cable between controller and main unit. Same as supplied.